Thursday, October 27, 2011

The Red Ring of Death Solved by Using an Xbox 360 Repair Guide

Over the past 4 years, there hasn't been an official repair for the Xbox 360 red ring of death. Many people have tried to develop a solution, but most of these solutions ended up being dangerous to the Xbox 360. So far there has been only been one method that has proved itself time and time again to be a permanent solution to the Red Ring of Death. This method is clearly outlined in an xbox 360 repair guide that illustrates the entire repair process and walks you through it step-by-step of the way. This method has proven itself to be the safest, fastest, and most effective repair that is currently available for Xbox 360 owners.

If after 4 years of manufacturing Xbox 360's you would think that the Manufacturer was capable of solving one of the worst errors in console history. Unfortunately they have not, which has driven many people to discover their own solutions. Fortunately for us, a group of professional technicians were able to develop a repair method that would not only permanently resolve the red ring of death, but resolve the overheating problems of the Xbox 360 which is at the root of many of the 360's errors.

The first problem tackled in an Xbox 360 repair guide deals with the GPU (Graphics Processing Unit) and the CPU (Central Processing Unit). These two chips are at the root of the red ring of death problem. The reason being,  that they are exposed to the overheating inside of the 360, and without these chips working properly, the system cannot run itself - thats how important these chips are. These chips were originally over-layed with a thermal compound paste designed to keep them safe from heat. This paste turned out to be insufficient against the un-predicted amount of heat created by the Xbox 360. The solution for this problem is simple; re-apply a better and more sufficient paste that can withstand greater amounts of heat.

To ensure that the above repair is done properly and lasts permanently, another repair is required. The Xbox 360 relies on two pieces of hardware known as the 'heat sinks' to keep the GPU and CPU cool, and protected. The problem is that when the console overheats the motherboard bends and becomes flexible. This throws the heat sinks off balance and leaves the GPU and CPU directly exposed to the heat. The solution that an Xbox 360 repair guide will show you, deals with creating a more stable foundation for the heat sinks so that they will not be able to move. This is done simply with a set of specific washers and screws.

In order to properly and permanently repair your console, the use of an Xbox 360 repair guide is necessary if not vital. This specific repair has proven itself for thousands of satisfied users that it's legit and can repair the red ring of death problem in about an hours time. After making this repair, your console will be free of overheating problems, and playing your console afterward will never be a worry again. Because of this I highly recommend the use of an Xbox 360 repair guide to properly repair your console for good.

To get more information on the above repair method and where to get the best Xbox 360 repair guide [] to repair your Xbox 360, you can visit, [], which is a site dedicated to providing 360 owners with factual information about the RROD, Xbox 360 system errors, and legit ways to repair their broken consoles.

No comments:

Post a Comment